brknvddll/solid-state-laser-modulator-control-unit
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Added resource for arduino setup

Browse Source
This commit is contained in:
BrokenVoodooDoll
2023-02-24 18:25:25 +04:00
parent 916b9f352b
commit 4419de90c1
1 changed files with 2 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
README.md
View File

@@ -20,7 +20,7 @@ The laser without a Q-factor modulator operates in continuous mode. But some las
![](images/pulse_scheme.svg) ![](images/pulse_scheme.svg)
The Arduino UNO hardware platform based on the Atmega 328p 8-bit microcontroller was chosen to perform this task. The control unit consists of only two components: a microcontroller (processes an external signal and generates pulses) and a power amplifier. The Arduino UNO hardware platform based on the Atmega 328p 8-bit microcontroller was chosen to perform this task, but basically, it could be any other Arduino or even bare Atmega chip. The control unit consists of only two components: a microcontroller (processes an external signal and generates pulses) and a power amplifier.
![](images/full_scheme.png) ![](images/full_scheme.png)
@@ -111,6 +111,4 @@ $t_b = 0.034\ \mu s < 0.4\ \mu s$
## Arduino adjust ## Arduino adjust
```cmd In order to program Arduino using assembly, the [following article](https://www.arnabkumardas.com/platforms/atmel/how-to-flash-or-program-arduino-from-atmel-studio/) can be used.
%ArduinoIDEPath%\hardware\tools\avr\bin\avrdude.exe -C "%ArduinoIDEPath%\hardware\tools\avr\etc\avrdude.conf" -p atmega328p -c arduino -P COM4 -b 115200 -U flash:w:"$(ProjectDir)Debug\$(TargetName).hex":i
```